1. Break-in your monitors.
New monitors require breaking-in time, as there are mechanical elements within the drivers that need to settle and adapt to the climatic environment, i.e. your mixing space. Once you’ve welcomed your fancy new pro monitors into their space, play music through them at moderate levels for twenty hours or so, with songs that have significant low frequency content. Once the transducers stabilize, you can enjoy optimum performance and a playback experience as the manufacturer intended.
2. Choose a mixing level.
Unlike most audio matters debated by aural aficionados, there appears to be a consensus around how loud you should be listening back to your audio when mixing. The magic number: 85 dB SPL. Investing in a top-notch dB meter will ensure you can keep an eye on your own mixes, though beware, mixing at loud levels can cause ear fatigue or worse—damage to your hearing and thus, your livelihood. So be sure to monitor at consistent, moderate listening levels. A good rule of thumb: monitor at a level where you have to speak just a little bit louder than normal to talk to the person sitting next to you.
3. When choosing secondary reference monitors, don’t be afraid to go old-school.
What’s up with those black and white near-field speakers we see popping up in every studio in the world? Weren’t they discontinued in 2001? Should you seek them out anyway?
Opinions on this differ (a lot!) but my answer is “Yes.” As a proud owner of a pair of NS10Ms, I can confidently say that when they’re installed, driven, and positioned properly (turn them down for best results), they shine a light on midrange and top-end frequencies unlike any other monitor, revealing the flaws behind your tracks. While the NS10s are uncontroversially colored in their frequency response, it's this coloration that forces the listener to shift attention and ultimately their entire perspective on certain elements of the mix. Think of the NS10s as that trusty friend who delivers the brutal truth about your new haircut, where others would politely nod and say, “Looks great.” Powered by a Hafler P3000 or Bryston 4B amp, (or something more economical like an ART SLA-1), they’ll potentially deliver the brutal truth about the inherent shortcomings of your mixes.
However, if you can’t get your hands on some NS10s, look for a great sounding pair of secondary monitors that you can learn to trust and will successfully translate you mixes across many output formats.
Whether you’re mixing on headphones or studio monitors, check out Neutron Elements, iZotope’s newest mixing plug-in.