Learn

Using Vinyl for an old radio sound

February 1, 2016
Learn how to dial in the sound of the radio era

Take your audio back in time for free:

Vinyl

iZotope email subscribe

Never Miss An Article!

Sign up for our newsletter and get tutorials and tips delivered to your inbox. 

In this example, Vinyl is being used to make a song sound as if it is being played from an old radio. The YEAR parameter band-limits the signal, making it sound as if it is being played back on small radio speakers. By adjusting the YEAR parameter to a higher setting, you can increase the perceived size of the playback setting. Meanwhile, the MECHANICAL NOISE, WEAR, DUST, and SCRATCH parameters all add dirt and simulate radio interference. 

This effect can be very useful in post production when mixing a scene at a location such as a bar, or when one character is on the other end of a phone call. In both of these situations, switching Vinyl into MONO may further help since both of these playback systems are either mono or have a very narrow sound stage.

Dial in an old radio sound

1. Set MECHANICAL NOISE to -16dB.

2. Set WEAR to 23%.

3. Set DUST to 6dB and DUST AMOUNT to 90%.

4. Set SCRATCH to -16dB and SCRATCH AMOUNT to

5. Set WARP DEPTH to 4%

6. Set YEAR to 1930.

7. Set RPM to 78.

Download the Vinyl recall sheet to keep track of your other best settings.

iZotope Logo
iZotope Logo

We make innovative audio products that inspire and enable people to be creative.

Subscribe to our newsletter

Get top stories of the week and special discount offers right in your inbox. You can unsubscribe at any time.

Follow us

Copyright © 2001–2019 iZotope, Inc. All rights reserved.